Request Appointment

 

 

 

Just about every person seems to have their personal thinking about How to Turn of.

If you try to shut the water off to your components by using an angle stop which does not work you will certainly need to shut of the water main to make your fixing. There are also numerous various other factors you might need to close the water pipe like repairing frozen pipelines, fixing leaks, replacing components or taps.
Many people are not aware that they even have a water pipe shutoff right in their own house and just call a plumber of never ever end up doing the repair until things obtain actually negative because they simply do not know that shutting the water pipe is actually very easy.
The most common locations a water pipe will certainly be situated in residence is in your boiler room, basement, or a cut out panel in a section for your house.
As soon as you locate the water pipe you will simply turn the valve clockwise to shut all the water off in your home up until you have actually completed the fixing. Some residences will certainly enjoy shutoff with a bar that you can draw instead of turn to shut the water off.

 

How to Find and Shut Off Main Water Shutoff Valve

 

Where is the main water shutoff valve located?

 

This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.

 

How to Turn Off Main Water Valve

 

Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.

 

If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.

 

Where are the isolation valves?

 

Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.

 

Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.

Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.

Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/

 

As a devoted person who reads on How to Turn off the Water for Plumbing Repairs, I figured sharing that piece of content was a smart idea. For those who enjoyed our blog posting if you please do not forget to pass it around. Thanks for taking the time to read it.

Book A Service